.. _octave_tutorial_stripline2msl: Stripline to MSL Transition ============================ Simulate the transition between a balanced stripline and an unbalanced microstrip line (MSL) and extract the S-parameters of the two-port transition. **Simulation time: ~2 min.** **This tutorial covers:** * Stripline port setup (balanced, ground planes above and below) * Microstrip line (MSL) port setup in the same simulation * Transition via (cylinder) with a circular cutout in the ground plane * Inhomogeneous mesh for improved accuracy and simulation speed: fine cells near the via gap, coarser cells elsewhere * S-parameter extraction and insertion loss analysis Octave/Matlab Script -------------------- .. include:: ./__StripLine2MSL.txt Images ------ .. figure:: images/StripLine2MSL_SParam.png :width: 80% :alt: S-parameters of the stripline to MSL transition S-parameters (S11, S21) of the stripline to microstrip transition